1125 Litre Drinking Water Stacking Tank
| Tank | Elliptical in section, moulded from PLP 330/7A602 Blue polyethylene. Approved for Drinking Water. Fitted with an outer lockable 18” diameter lid, covering an inner sealed & vented lid. 2” Male hydrant quick release fill coupling fitted under outer lid. Internal Anti Surge baffle. 2 rear lockable brass draw off taps, 2” lockable drain ball valve in base of Tank. Tank secured to frame by 2 no. stainless steel securing straps. Secretary of State approved under regulation 31a & British Standard BS 6920:2000 | |
| Frame | 4 Legged Pallet Type frame constructed from 50 x 50 R.H.S. section. 2 No. Pressed steel fork truck channels fitted under base of tank frame. 4 No. 70mm Square pallet feet fitted to base of upright legs for locating frames. 4 No. Built in 50mmdiameter lifting eyes welded to uprights. All framework fully hot dipped galvanised to British Satndards | |
| Optional Extras | 2” Male Hydrant connection fitted under outer top manlid Rubber blanking cap for male hydrant fitting Rear Dog Guards for Taps (each) 2” Locking ball valve on discharge outlet | |
| Dimensions | Length 1828mm(6’0”) Width 1537mm (5’1/2”) widest point Height 1524mm (5’ 0”) Laden Max: 1316kg approx. Unladen Weight: 180kg approx. | |
Take advantage of our FREE SITE SURVEY to ensure you hire
the right machine for the job - just call our sales desk.